Sticking Instructions
Detailed sticking instructions for applying stickers
Apply instructions for stickers with application film
To professionally install a decal with application film, it is important to prepare properly and take enough time. The duration of installation varies for each decal and depends on the size. Be patient and take enough time to install the decal. Make sure your vehicle is dry and the temperature is at least 10 degrees Celsius. Once the sticker sticks, it can withstand cold, rain and washing after 24 hours.
How will my sticker be delivered?
Your sticker comes with a backing an application film on it, which makes application easier. You also have the option of purchasing a squeegee separately for application.
What do i need?
– Degreaser (Surface cleaner towel)
– Non-linting cloth (e.g. microfiber cloth)
– Papertape
– Tape measure
– Squeegee
– A razor-sharp craving knife or scissors
Step-by-step guide:
Make sure the vehicle or surface on which you will stick the decal is well polished and clean.
Lay the decal flat and brush over the decal with a squeegee. This will prevent pieces of film from being left on the backing when you remove it.
Degrease the surface where you want to stick the decal with one or more degreasing wipes.
1. Take the sticker and position it approximately where you want to stick it. Secure it provisionally with pieces of paper tape.
2. Align the decal using a tape measure.Reattach it with paper tape, securing the paper tape across the center of the decal and to the side.
3. Breng de linkerkant van de sticker naar het midden tot aan de papiertape. Knip of snijd de backing af.
4. Return the sticker to its original position.
5. Brush over it with the squeegee.
6. Repeat this process for the other half of the sticker.
7. Then pull off the application film under a very flat hoof.
8. Done!
Application Instructions for Photo / Full Color Stickers
To apply a photo / full color sticker professionally, it is important to prepare properly and allow enough time. The duration of the application varies per sticker and depends on its size. Be patient and take enough time to place the sticker. Make sure your vehicle is dry and that the temperature is at least 10 degrees Celsius. Once the sticker is applied, it can withstand cold, rain, and car washes after 24 hours.
For larger stickers, we recommend working with two people.
How will my sticker be delivered?
Your sticker is delivered with a backing. You also have the option to purchase a felt squeegee separately for applying the sticker.
What do i need?
– Degreaser (Surface cleaner towel)
– Non-linting cloth (e.g. microfiber cloth)
– Papertape
– Tape measure
– Squeegee with felt
– A razor-sharp craving knife or scissors
Step-by-step guide:
Make sure the vehicle or surface where you will apply the sticker is well polished, clean, and dry. Degrease the area where you want to apply the sticker using one or more degreasing wipes. Take the sticker and position it in the desired spot. Temporarily secure it with pieces of paper tape.
1. Align the sticker using a measuring tape. Then secure it again with one strip of paper tape across the center of the sticker, extending over both sides.
2. Fold back the top part of the sticker up to the tape strip.
3. Peel off the backing from the folded top half and remove it by cutting or slicing it.
4. Carefully bring the top part of the sticker back to its position without touching the surface.
5. Squeegee the top part: work from the center outwards.
6. Continue slowly and evenly until the entire top half is applied.
7. Remove the paper tape. Then gradually peel away the remaining backing under the bottom part, a little at a time, while squeegeeing.
8. Apply the bottom part in the same way. Start at the top in the middle and work from the center outwards. Continue until the entire sticker is firmly applied.
9. Done! Check that all edges are properly squeegeed.
You can use, these accessories for applying your decal?
Stick it right, otherwise there is nothing left
What are the guidelines for sticking angles morts stickers
Here are the guidelines for sticking angles morts stickers. These illustrations show where it is best to hang them according to the rules required by France. Before you get started, please review the adhesive instructions for full collor stickers.
